AURA RGB One Point Ten 5V Hub – SATA Powered for Ten-Device PC Lighting

Building a multi-device RGB lighting setup in your PC can quickly exhaust the limited number of 5V 3-pin headers on a motherboard. The AURA RGB One Point Ten 5V hub provides a simple, practical solution by expanding one motherboard header to support up to ten separate RGB lighting devices. Instead of relying on the motherboard’s limited power output, this hub draws additional current through a SATA power connection, reducing the risk of overloading the RGB header. This makes it a useful component for enthusiasts who want to synchronise several addressable LED strips, fans, or other 5V compatible lights without daisy-chaining or splitters.

Features and Construction

The hub is built around a straightforward expansion design with a single input from the motherboard and ten outputs for RGB devices. It is powered separately via a SATA connector to help maintain stable current delivery. The black plastic body fits neatly inside most desktop cases.

Interface and Ports

One 5V 3-pin RGB input lead connects to your motherboard header. The hub then distributes that signal to up to ten output ports, each with a 3-pin female connector. This arrangement allows you to run multiple RGB devices in parallel while keeping the electrical load off the motherboard’s own header.

Size and Practical Fit

The hub itself is compact, though exact dimensions are not stated. Its black plastic casing is lightweight and easy to mount using adhesive tape inside the case. The manufacturer recommends keeping each RGB device cable run under 3.3 feet to avoid voltage drop that can cause dimmer lighting.

Uses and Placement

This hub is designed primarily for desktop PC builders who want to add multiple 5V addressable RGB devices without exceeding the current capacity of a single motherboard header. Its unisex compatibility means it works with any standard DIY build that includes a 5V 3-pin header.

Gaming and Enthusiast Builds

For gaming rigs or showcase builds with several LED fans, strips, or light panels, the hub centralises the cabling and simplifies synchronisation. By using a single input from the motherboard, all connected devices receive the same RGB signal, making it easier to achieve a unified lighting effect.

Everyday Home Use

In a standard PC setup, the hub helps organise lighting wiring and reduces the number of splitters or adapters needed. It is particularly useful when the motherboard has only one 5V RGB header but you want to install lighting in multiple locations inside the case.

Benefits and Buying Value

The main advantage of this hub is its ability to handle multiple devices from a single motherboard header without overloading it. The SATA power connection provides a dedicated current path, which helps maintain consistent brightness across all connected lights.

Reuse and Low Maintenance

Once installed, the hub requires no ongoing maintenance. It is a passive component that simply passes the RGB signal and power. As long as the total current draw of the connected devices stays within what the SATA connection can supply—which is typically ample for LED lighting—the hub will operate reliably.

Why Choose This Product

If you are building or upgrading a PC with multiple 5V RGB devices and your motherboard has limited headers, this hub offers a straightforward expansion path. It avoids the need for complex wiring and helps keep the build tidy, while the SATA power input adds a layer of current safety for the motherboard header.